2018 John Deere S240 48-in. Deck

*LOCAL TRADE IN* *UNIT HAS HAD A FULL TUNE-UP* *ONLY 270 HOURS ON UNIT* *HAS A MULCH KIT INSTALLED ON A 48 INCH DECK*
MoreLess

2018 John Deere S240 48-in. Deck

Lawn Tractor with 48-in. Deck
  • Two side-by-side forward and reverse pedals
  • Wide, welcoming operator station
  • Cool and comfortable 15-in. (38 cm) open, high-back seat
  • Powerful V-Twin Engine
  • 48-in. (122 cm) Accel Deep™ Mower Deck with MulchControl™ Kit option

Features may include:

Engine is powerful and smooth-running premium V-twin design

The S240 Tractor comes with a premium engine, the same as used in some Select Series™ X300 models:

  • Large cleanout ports, integrated into the engine shroud, are located over the cylinder heads to allow for easy inspection and removal of any debris that may have collected there.
  • Premium engine oil and air filtering systems and cooling design provide increased reliability and engine life.

The 18.5-hp (13.8-kW) V-twin engine provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:

  • V-twin cylinder design for greater torque, lower vibration, and improved sound quality
  • Electronic ignition for fast starts
  • Cast-iron cylinder liners for longer engine life
  • Overhead valves for excellent power and fuel economy
  • Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life and extending the time between oil changes
  • Also more effective when operating the tractor on an incline
  • In-line fuel filter for reliable operation

The engine speed lever and choke control lever are separate controls:

  • The engine speed lever easier to use - there is no need to worry about pushing too far and engaging choke as on single throttle/choke lever systems.
  • The choke lever is spring loaded so the operator cannot accidentally operate the tractor with the choke on.

Engine hood opens wide for easy access to service points:

  • It is easy to inspect and clean the engine area.
  • Important service points are exposed.
  • Cleanout ports designed into the engine shroud make cleaning the engine cooling fins easy.
  • The high-quality engine used in the S240 does not require an 8-hour oil and filter change because improvements in the manufacturing process and quality of parts, components, and oils have eliminated the need for the short interval oil change requirement.
Full-length, welded-steel frame and cast-iron front axle for reliability

Enhanced styling for the S240 Tractor includes a unique hood top:

  • Close-out panels at the lower back of the hood are included for better looks and reduced engine sound level.
  • Top louvers improve engine cooling.

The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.7-mm) steel:

  • Full-length robotically welded frame design has high-strength steel rails for added strength and long life.
  • One-piece fender deck is bolted to the frame.
  • Two-bar front bumper is included as standard equipment to add style and protection.

The S240 comes with premium Turf Trac tires for superior traction and appearance:

  • A more rounded profile reduces lawn scuffing and steering effort.

The front axle is constructed of solid cast iron that will not bend:

  • Automotive-like steering system with sector-and-pinion steering gears and single drag link and tie rod provides a very strong, low-effort, and tight-turning system.
  • Grease fittings allow regular lubrication to help maintain easy steering and minimize wear.
  • Large, 0.75-in. (19-mm) diameter wheel spindles provide excellent durability.
  • 2018
  • John Deere
  • S240 48-in. Deck
  • Base
  • Riding
  • Model: FS600V
  • Overhead valve, full-pressure lube, oil filter
  • 18.5 hp (13.8 kW)
  • 36.8 cu in. (603 cc)
  • V-twin, cast-iron liners
  • Mechanical
  • Separate levers, automatic choke return
  • Air
  • Dry, replaceable with foam precleaner
  • Transaxle: Internal, not replaceable
  • Gasoline
  • Delivery: Pulse pump and carburetor
  • Mechanical, viewable from seat
  • Mower: Electric power take-off (PTO) clutch | Mower attachability: Single belt
  • Sector and pinion with single drag link and tie rod
  • Fuel tank location: Rear | Hourmeter: With service reminder | Reflectors | Cruise Control: Standard | Oil cooler: Fins and fan on transaxle | Primer/paint: E-coat/powder | Floor mats: With debris removing channels | Storage tray with cover | Service interval decal | Fender handles/grips: Handgrips | Cup holder | Equipment mounting: CargO Mount™ system | Mower deck type: Side discharge | Mower wash port | Mower level adjustment: Easy-level deck
  • Internal wet disk
  • Cast iron front axle, front wheel ball bearings
  • 15x6-6
  • 20x10-8
  • Mower: Four | Mower, adjustment: One bolt
  • 12 V (195 CCA)
  • Flywheel alternator, regulated, 15 amp
  • Engine: Bendix type
  • Transaxle Forward speed: 0-5.5 mph (0-8.9 km/h) | Transaxle Reverse speed: 0-3.2 mph (0-5.1 km/h)
  • Equipment mounting: CargO Mount™ system | Mower attachability: Slide under tractor | Front draft arms: One spring clip | Rear draft arms: Two spring clips
  • Full-length welded steel
  • Fuel fill opening, Center: 1.75 in. (4.45 cm) | Steering, Uncut circle radius: 25 in. (63.5 cm)
  • 75.1 in. (191 cm)
  • 44.6 in. (113.2 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)
  • With mower: 62.5 in. (159 cm)| With mower (deflector raised for storage): 53.6 in. (136 cm)
  • 48.9 in. (124.2 cm)
  • 48 in. (122 cm)
  • Steering: 18 in. (45.7 cm)
  • Back: 15 in. (38.1 cm)
  • Fore-aft adjustment (While seated): 5.5 in. (14 cm)
  • Deluxe, diameter: 14 in. (35.6 cm)
  • Tank: 2.4 U.S. gal. (9.1 L)
  • 458 lb (208 kg)
  • Two standard, incandescent
  • Meets ANSI standard | Meets OPEI standard | Safety video
  • Open-back design with grasp | Suspension: Tilt, two rubber isolators
  • Type: Lever on fender deck
  • Hood: JD Loy, UV resistant
  • Fender: Stamped steel | Mower: Stamped steel deck shell, Steel, 10 gauge 0.135 in. (3.4 mm)
  • 13 positions
  • U.S.: 3-year/200-hour bumper-to-bumper
  • 48
  • Stamped
  • KAWASAKI
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $2,499.95
  • Homer Glen
  • Pre-Owned
  • 2018
  • John Deere
  • S240 48-in. Deck
  • Model: FS600V
  • 21.5
  • 270
  • Equipment mounting: CargO Mount™ system | Mower attachability: Slide under tractor | Front draft arms: One spring clip | Rear draft arms: Two spring clips
  • Gas
  • Available
  • With mower: 62.5 in. (159 cm)| With mower (deflector raised for storage): 53.6 in. (136 cm)
  • 44.6 in. (113.2 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)
  • 48
  • Stamped
  • KAWASAKI
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.